Fire Alarm Installation Greenford

Fire alarm installers serving Greenford

Greenford grew up around the A40, and it shows. The industrial parks strung along the corridor are full of trade counters, workshops, wholesalers and food production and storage units — the kind of medium-sized commercial buildings that rarely make headlines but keep half of West London supplied. Around them sit the long avenues of 1930s semis that make up most of UB6, along with the schools, shops and places of worship that serve them. Fire detection for a trade counter with a mezzanine and detection for a suburban semi are entirely different jobs, and we do both, often in the same week.

Ignis Secure Limited is a local West London firm, and we design, install and commission fire alarm systems across Greenford with reference to BS 5839 — part 1 systems for commercial and industrial premises, part 6 for dwellings and HMOs. Our main fire alarm installation page explains the system types and categories in more detail, and you can see our full coverage on the areas we cover page.

The work we do around Greenford

Industrial units and workshops on the estates along the A40 corridor, with call points at final exits, zoning that tells you which part of the unit is in alarm, and detection matched to the roof height and the processes underneath it.
Trade counters and wholesalers, where the sales floor, warehouse and mezzanine each need coverage of their own and sounders have to carry over a busy counter.
Food production and storage units, where steam, flour dust and chilled areas rule out ordinary smoke detection in places and the design has to respect hygiene-controlled zones.
Small industrial lets, where we help landlords and tenants sort out who is responsible for what and certificate the result.
Schools and nurseries across UB6, phased around term dates and the school day.
1930s semis, family homes and HMOs in the streets between the Broadway and the estates, installed to the grade and category the property calls for, with wireless options that spare original plasterwork.

Designed for units, racking and mezzanines

An industrial unit is not an office with a higher ceiling. Smoke stratifies under a tall roof before a ceiling detector ever sees it, racking blocks the throw of sounders and detectors alike, and a mezzanine added years after the original fit-out often has no coverage at all — which matters the day the fire starts underneath it. We survey the operation as well as the shell: what is stored, how high, what runs hot, where the forklifts go and where people actually are during the working day. The design follows from that, whether it ends up as a simple zoned conventional panel or an addressable system across several units. Every installation is commissioned, certificated and handed over properly, and we back it with servicing and fault-finding so the system stays dependable instead of becoming the thing everyone ignores.

Landlords of small industrial lets

A lot of Greenford's units are let to small businesses on short leases, and fire alarm responsibility is a regular source of confusion. Broadly, the premises need a fire risk assessment, and the split between landlord and tenant follows the lease — the landlord usually owns the fabric and any shared parts of the estate, while the tenant's use of the unit determines what detection makes sense inside it. We work for both sides: baseline systems a landlord can hand over with confidence, and extensions or upgrades when a tenant's fit-out changes the risk. If you are not sure where your obligations start and finish, a survey is the quickest way to find out, and ours are free.

Homes across UB6

The residential side of Greenford is a steady part of our diary too. Interlinked detection in 1930s semis, systems for HMO licences, and upgrades when a loft conversion or extension changes what a house needs — usually wireless, so there is no chasing cables through ninety-year-old plaster. Many households add an intruder alarm or CCTV in the same visit, and our electrical team covers EICRs for landlords.

Frequently Asked Questions

Do you install fire alarms in industrial units and trade counters in Greenford?

Yes — the estates along the A40 corridor are the heart of our Greenford work. A typical unit needs manual call points at the final exits, detection chosen for the roof height and what goes on below it, and sounders you can actually hear over saws, compressors and a busy counter. Where there is racking or a mezzanine we design coverage for those levels too, rather than pretending the unit is one open box.

I let out a small industrial unit in Greenford — what do I have to provide?

It depends on the lease, but broadly the fire safety of the premises has to be based on a fire risk assessment, and responsibility is usually shared between landlord and tenant. Landlords typically look after the fabric and any communal parts of an estate, while the tenant's use of the unit drives what detection is needed inside it. We install and certificate systems for either side, and we can survey the unit so both parties know exactly where they stand.

Can you install around production or opening hours?

Yes. Food production and storage units cannot simply down tools, and a trade counter cannot shut for a week. We plan the work in agreed windows — early mornings, evenings or weekends where needed — phase it area by area, and keep dust and disruption away from production and hygiene-controlled zones.

Which parts of Greenford do you cover?

All of UB6 — Greenford town and Greenford Broadway, the industrial estates along the A40, and the surrounding streets — plus neighbouring Perivale, Northolt and Sudbury. We are a local West London firm, so surveys and call-outs are quick to arrange.

Where we work

We cover the whole of Greenford and UB6, including Perivale, Northolt and Sudbury. Nearby, we also have dedicated pages for Ealing, Southall, Harrow and Hayes.

Fire Alarm Installation in Greenford